Learn PDR (Paintless Dent Removal) with The Dent Men
All our training is carried out at our training facility only 10 minutes from Stansted Airport. It is fully set up to provide the best environment possible to learn all you need about Paintless Dent Removal and to give you the confidence to start a career as a PDR Technician.
We provide clear and detailed instruction, backed up with practical demonstrations to ensure you gain the skills required. With a maximum of 4 trainees at a time you can be sure you get as much attention as is needed to master each technique. Ongoing support will also be provided to ensure confidence continues to grow as you do the job for real.
We are now able to offer a finance plan for training costs to ensure you are able to book your courses and focus on becoming a PDR Technician as quickly as possible. To apply click here.
OUR MOST POPULAR COURSES
Covering every aspect of Paintless Dent Removal. Whatever you’re training goals we have you covered!
Online PDR Training
Our online Training platform allows you to complete our beginners course and our advanced course through detailed video instruction, in your own environment for an affordable monthly or annual fee.
The online platform also allows you access to business and marketing advice and tricks of the trade, with new content being added every month.
We have a basic beginners tool kit available to purchase which will allow you to get started with the beginners course and will form the back bone to your full PDR kit. Tool kit cost – £250
5 Day Beginner PDR Training - £995+vat
This course provides a full introduction to the PDR skill and should ensure all participants gain enough knowledge and practical experience to repair ordinary minor dents.
- Tool selection
- Reading the reflection
- Locating the tip
- Removing a small shallow dent
- PDR Hammer and tap down
- Golf ball sized dent removal
- Restricted access tools
- Body line/swage line dents
- Crease and door dents
- Vehicle access points + trim removal
- Glue pulling dent removal
- Finance Available
5 Day Advanced PDR Training - £995+vat
The advanced course is for technicians that have completed the beginners PDR course or have relevant past experience and want to develop their skills to the higher level. On completing the course technicians should be able to repair the majority of dents presented without paint damage.
- Sharp dent repairs
- Larger dent repairs
- Working on an actual vehicle
- Crown work
- Large creases
- Advanced glue pulling
- Restricted access dents
- Finance Available
After completion of your 5 day training you will receive a certificate, certifying your qualification in Paintless Dent Removal.
FREE taster sessions are available
Local accommodation can be recommended if required
To apply for finance to get on board with your PDR training click here .
1 Day Introduction to PDR Course and 1 Day Glue Pulling Course also available - £250+vat
MEET YOUR TRAINER
Aaron Hill
ACHIEVE YOUR PDR TRAINING GOALS TODAY
Aaron was born in Huntingdon on 6th March 1986. He started his PDR career in 2009 and was trained by the illustrious John Haisman, where his natural ability soon became apparent. His business ‘The dent men’ was an immediate success with impressive growth year on year leading him to employ his first PDR Tech after just 4 years. After a further 2 years Aaron took on a second PDR Tech making them a 3 man operation allowing him time to begin his dream of setting up his own training centre to pass on his skills and knowledge to other budding techs.
Now having trained over 250 people on a face to face basis including bodywork assembly technicians from the likes of Mclaren and Bentley UK and numerous leading bodyshop owners, Aaron’s structured training courses share the best practices, with the most up to date tools and techniques from around the world.
Not only a fantastic PDR Tech, Aaron has proven to be an excellent coach, able to clearly communicate and translate his experiences out on the road as a dent man to beginners and PDR techs of all levels. With over 13 years as a tech himself and 7 years experience coaching, Aaron has the most in demand training program in the UK, with people travelling from all over Europe to attend his face to face courses. Not all PDR techs make good coaches, however this is something Aaron excels at.
Choosing the right training company for you.
Whether you are considering a complete change of career or want to upgrade your existing PDR skills, with so many options and advice on PDR training, it is vital that you research any training company very carefully.
The company credentials are paramount. Their reputation and experience, their success rate within the PDR industry, their attention to detail in teaching and repairs plus the success rate of previous trainees. After all, their success is the training company’s success.
When contacting a PDR training company, it is important and if possible, to visit the training venue and personally meet the technician who will be teaching you.
A good PDR training company will offer you a taster session where you will be able to try your hand before making any decisions, this should be free of charge.
Ask for a demonstration from your trainer personally removing a dent for you. After all it’s their skill and experience you are paying for.
Be prepared. Ask questions and raise any concerns you may have regarding the training course. Taking notes can be beneficial
We cannot emphasise enough how important it is that you feel comfortable and happy before you make a commitment in booking a course.
It is so important that only the most focused student with adequate physical condition attends. This is a concentrated PDR training course, good hand-eye coordination and 20/20 correctable vision are required (glasses or contact lenses are fine) PDR is physical, demanding and requires adequate good health.
No previous experience in the motor industry is necessary for you to consider PDR as your next career choice, and if you have worked or do work in the car wash, detailing, mechanical, bodyshop, SMART repair or panel beating industry already, why not upskill and add PDR to your arsenal.
Thanks for taking the time to read this page, if you are interested in my PDR training or would like to visit us at our workshop in Saffron Walden for our no-obligation taster session, please feel free to contact me, I am more than happy to help.
Now having trained over 250 people on a face to face basis including bodywork assembly technicians from the likes of Mclaren and Bentley UK and numerous leading bodyshop owners, Aaron’s structured training courses share the best practices, with the most up to date tools and techniques from around the world.
Not only a fantastic PDR Tech, Aaron has proven to be an excellent coach, able to clearly communicate and translate his experiences out on the road as a dent man to beginners and PDR techs of all levels. With over 13 years as a tech himself and 7 years experience coaching, Aaron has the most in demand training program in the UK, with people travelling from all over Europe to attend his face to face courses. Not all PDR techs make good coaches, however this is something Aaron excels at.
If you wish to proceed but are wondering about how to pay for the courses we are now able to help with a finance package subject to approval. This may help by eliminating the need for a lump sum outlay. To apply for finance to get on board with your PDR training click here .
Why Train With Us?
We have unrivalled experience in teaching PDR and have delivered training for some of the largest and most prestigious manufacturers in the world. All students are trained by one of the most experienced trainers in the UK. We take an open and honest approach with no bull regarding our success in the PDR industry. We use tried and tested training techniques to ensure the best outcomes. You want training in mobile dent repair? it’s what we do!
It is very important to us that you do not fail or make life unnecessarily hard for yourself. Take your time and get it right from the very start. Try before you buy, you are welcome to visit us at our workshop in Saffron Walden for an unconditional, no-obligation taster session. Try your hand at PDR and see if this is a career vocation for you prior to booking any PDR training course.
Matthew Basham – “Fantastic 5 day training course with Aaron. Would highly recommend to anyone in the motor trade, looking to get into the motor trade or anyone looking for their vehicle to look brand new again. The dent men are amazing at what they do. Thank you very much. 5 star”
Jack Payne – “What a superb training course. Enjoyed every minute of it and learnt an incredible amount in the space of 5 days. Aaron is one of the nicest blokes you will come across and is brilliant at sharing his knowledge. If you are looking at this, do not hesitate just get it booked, you will not regret it.”
Richard Black – “I’ve just completed the 5 day training course, Aaron was very knowledgeable and a great trainer. If your thinking of training I would highly recommend you go with the dent men, you won’t be disappointed 5*****”
Michael Chambers – “Amazing weeks training… Top guys and would highly recommend The Dent Men to anyone… Very supportive and helpful staff within this company. Special thank you to Aaron.”
Nathan Hitchcock – “Just finished my first weeks dent repair training, the course was first class, Aaron is just brilliant so helpful, the week went so quick, looking forward to the advanced course next.”
Ian Mark – “Just finished my first weeks dent repair training, the course was first class, Aaron is just brilliant so helpful, the week went so quick, looking forward to the advanced course next.”
Contact us now for more information or to enquire about booking your FREE taster session
The FREE taster session allows you to meet the instructor, see the training premises, check out the modern tools used for PDR work and get the chance to carry out a small dent repair there and then!
